Top Outlet Atkinson Tanktop Tank Fitting Kit (AC.TFK.TOP)
    Top Outlet Atkinson Tanktop Tank Fitting Kit (AC.TFK.TOP)

    Top Outlet Atkinson Tanktop Tank Fitting Kit (AC.TFK.TOP)


    ex tax


    inc tax

    Price as configured


    inc tax

    Top Outlet Atkinson Tanktop Tank Fitting Kit (AC.TFK.TOP)
    Top Outlet Atkinson Tanktop Tank Fitting Kit (AC.TFK.TOP)

    Please allow 2 - 3 days for delivery


    Top Outlet Atkinson Tanktop Tank Fitting Kit (AC.TFK.TOP)

    Atkinson Tanktop, Top Offtake Valve

    Draw oil from your tank safely with the Atkinson Tanktop, Top Offtake System.

    Leading the way into the world of Top Offtake, the Atkinson Tanktop is the WORLDS FIRST AND ONLY Top Offtake device with all of the necessary features and functions to responsibly draw oil from the top of a tank. EC Reg. Des. No: 000472493-0001.

    This innovative product has all the components required for drawing fuel oil from the top of the storage tank in one unit (no joints to leak oil out or air in). It incorporates all of the following into one neat, easy to install, unit:

    • Floating Suction Head

    • Floating Suction Tube (1.6M)

    • Non-Return Valve

    • 50 Micron Filter

    • Diaphragm Anti-siphon Valve

    • Anti-spill Valve

    • Tank Inlet Fitting 1" BSPM

    • Purging / Priming Button

    • Surface Gasket

    • Waterproof

    With Top Offtake, it is imperative that joints are well made so with only one joint to make, the Atkinson Tanktop is the answer to an Engineer's dream.

    This product draws on over 40 years of experience of manufacturing products for the oil heating market. The product incorporates an anti-siphon valve to prevent fuel siphoning from the tank in the event the oil line is broken, thus avoiding environmental pollution (incurring hefty fines and clean-up costs).

    It is designed for the 21st century, where the demand is for a system that avoids breaching the bund on an oil storage tank and thus minimising the risk of environmental pollution, as supported by the Environment Agencies and OFTEC.

    Now with 10mm push-fit hydraulic connector for simple fitting (blue connector is shown in photograph) inside the restrictive space of the bund - push the 10mm oil pipe into place — no screwing and making the joint air-tight required whatsoever.

    Important Note: The pressure is pre-set in the factory at a 150 mbar negative head, and this is not adjustable by the user (suitable for all known boilers on the market). If you require this to be pre-set to any other pressure between 0-600 mbar, then you will need to let us know at the time of your order, and we will pre-set this for you before dispatch, Please fill in the box above.

    It is also recommended you have a Deaerator in your oil line.