A steel bunded bulk liquid storage tank with 1050 litres (230 Galls) capacity. It is literally a tank within a tank.
The liquid is stored in the primary or inner tank and the outer tank forms the required bund with capacity for 110% of the primary tank's capacity. This tank is suitable for the storage of heating oil, kerosene, diesel, waste oils and many other liquids.
They are manufactured to the highest standards and conform to BS799 pt5 type J. The thickness of the steel used varies with tank size and all tanks are pressure tested before they leave our workshop. They are supplied with one coat primer and one top coat which is normally green in colour as standard. It is possible however to request any colour you like at no extra cost.
They are also very good at deterring the would be opportunist in oil theft which is very much on the rise currently.
The following features come as standard with the tank:
- 2" fill point
- 1" bottom outlet
- 1.5" port for a gauge
- Vent to bund
- Bund vent
- 1" Suction drain port
- 50mm Full Length Bearers
Optional extras include:
- Top outlet to replace bottom outlet (please contact our sales office if this option is required)
- Apollo Sonic contents gauge or...
- Clock face gauge
- Bottom outlet fitting kit
Full installation instructions are supplied with the tank and we recommend a base size which extends 300mm all the way round the tank.
Example: if the tank dimensions were 2000mm length x 1500mm width - we would recommend a base size of 2600mm length x 2100mm width.
Please contact our sales team for answers to any other questions you may have. We will be delighted to speak to you.